ferrites & magnetsgarnets & dielectrics
HOME
COMPANY PROFILES
HISTORY
CAPABILITIES
MATERIALS
PRODUCTS
SERVICES
WHAT'S NEW
DESIGN INFO
CONTACT US
 
slugs/cylinders/rods

 

Ferrite: Slugs

applications: rfid(transponders), power, emi supression, antennas/filters, chokes, ignition coils, pulse                       transformers

outside diameter
length
mass
p/n
in.
(mm)
in.
(mm)
grams
SC-
1334
0.016
0.41
0.030
0.76
0.0005
1312
0.018
0.46
0.030
0.76
0.001
1518
0.022
0.56
0.250
6.35
0.008
1326
0.024
0.61
0.030
0.76
0.001
1093
0.032
0.81
0.187
4.75
0.01
1127
0.040
1.02
0.187
4.75
0.02
1153
0.055
1.40
0.187
4.75
0.04
555
0.065
1.65
0.375
9.53
0.1
1139
0.090
2.29
0.187
4.75
0.1
1349
0.095
2.41
0.700
17.78
0.4
1083
0.116
2.95
0.312
7.92
0.3
1103
0.125
3.18
0.312
7.92
0.3
1107
0.150
3.81
1.250
31.75
1.8
246
0.156
3.96
0.500
12.70
0.8
1047
0.187
4.75
0.875
22.23
1.9
1075
0.195
4.95
1.250
31.75
3.0
919
0.250
6.35
2.000
50.80
7.8
1074
0.300
7.62
1.000
25.40
5.6
1061
0.312
7.92
2.000
50.80
12
1071
0.330
8.38
2.000
50.80
14
971
0.375
9.53
2.000
50.80
18
1116
0.485
12.32
2.000
50.80
29
999
0.500
12.70
2.000
50.80
31
1434
0.670
17.02
0.625
15.88
17
1516
0.845
21.46
1.000
25.40
45
1435
0.900
22.86
2.000
50.80
101
1045
0.975
24.77
2.000
50.80
119
1436-1
1.062
26.97
0.750
19.05
53
1471
1.280
32.51
1.500
38.10
153
1437
1.350
34.29
0.750
19.05
85
1155
1.425
36.20
0.750
19.05
95
1438
1.670
42.42
0.250
6.35
43
1439
2.070
52.58
1.000
25.40
267
1440
3.100
78.74
0.500
12.70
300
notes:
1) material designation will be a prefix for NiZn materials (ie.M-919) or a suffix for MnZn materials
     (ie. SC-919-M20)
2) magnetic tolerance for inductance +/-10% and for Q -20%
3) mechanical tolerances approximately +/-1.5% (nominal values may vary per material)
4) outer diameter may be ground to tighter tolerances (ie.+/- 0.001 in.)
5) length adjustable to suit application requirements (given existing tool limitations)
6) for lengths > 2.000 in., see Rods / Tubes & Impeders / Strips
7) refer to Effective Permeability of Ferrite Rods for relationship between material permeability and slug     (effective) permeability
8) call if required sizes not found (not all tool sizes are listed)
9) parts available coated with parylene (0.0005 in. nominal) (ie. SC-11334P-M20)

 

 

National Magnetics Group | TCI Ceramics
Manufacturers of technical ceramics (magnetic and advanced materials) and powdered iron cores

Corporate Headquarters
1210 Win Drive, Bethlehem, Pennsylvania 18017-7061 USA | Tel: 610-867-7600 | Fax: 610-867-0200

Ferrites and Magnets: sales@magneticsgroup.com | Microwave and Advanced Materials: sales@tciceramics.com